ScAir Structures aren’t just for Halloween.  Although a haunted attraction is the most obvious answer to this question, ScAir Structures can be applied to a much broader set of applications, because they can be transported in a standard truck or van and assembled by two people in 3 hours or less. ScAir Structures can be operated as; a dark maze, a laser tag arena, paint ball or water tag arena, they can be operated at carnivals, fairs, festivals, pumpkin patches, park district events and farm or other locations too. ScAir Structures can be rented to corporations for team building events or to event planners for other special occasions.

If you own a Halloween, costume, party supply or magic store, you could set up a ScAir Structure in your parking lot and decorate it with your merchandise. Then operate the attraction with a minimal size staff, for free or a small entry fee. This will allow you to market your merchandise inside the attraction. It will also help promote your place of business and provide a 12’ by 30’ billboard in your parking lot. It can also be simply used to add additional temporary square footage to your location, during the busy seasons.

One of our customers had the most unique idea for ScAir Structures. Their company promoted nightclub events. Their plan is to use ScAir Structures to provide a temporary nightclub at locations throughout their city. The disc jockey, effect lighting and foam party and dance floor would be set up inside the unit.

Because of the low cost, ScAir Structures, provide start-up haunts an inexpensive way to develop their venue. However, if you have an existing attraction ScAir Structures can compliment your attraction the following ways:

1) By adding a ScAir Structure to you attraction, you turn your single attraction venue into a multi- attraction venue, allowing you to increase your ticket price.

2) A ScAir Structure can be added as a single themed room to your existing attraction.

3) You can place a ScAir Structure at the entrance to your attraction and use it as a themed Queue line. This will provide a more attractive and entertaining area for your patrons to wait in line before entering the main attraction. It will also protect them from foul weather conditions while they wait.

4) You can place ScAir Structures at a location separate from the main entrance and use it as a V.I.P entrance. Simply charge an additional fee on top of the standard ticket price and lead those patrons through the ScAir Structure entrance.

5) Since ScAir Structures can be set up in hours and operated with a staff of just a few people, you can operate it throughout the year at local fairs, carnivals and festivals. This will help generate additional revenue for your main Halloween season attraction and it will also provide you with the opportunity to promote your Halloween attraction at these off-season events.

6) Finally, ScAir Structures can be a good investment for home haunters. Although the cost is somewhat higher than some home haunters may want to spend, the benefits make it worth while. The unit itself can be set up in a front yard, backyard, 3 car driveway, etc.. And two people can set up the entire ScAir Structure, including lighting, sound and decorations, in one weekend. Home haunters won’t have to spend nearly as much time away from their families assembling their haunt. Plus, when Halloween is over the unit will roll up and fit in the corner of a garage. Eventually, the unit could be moved to a field or parking lot and turned into a “for-profit” event.

What makes “scaring up” my ScAir Structure unique?

One of the best tactical features in our ScAir Haunt is the walls. By simply attaching a wall with the Velcro tabs at the top and leaving one or both of the bottom corners unsecured, an actor can slip in and out of the walls. This gives one actor access to as many as four different zones.

When a wall panel is attached between interior columns a natural “recess” is created, giving an actor the opportunity to stand directly in a pathway or room without being seen.

Another great “built in“ feature is the darkness. ScAir Structures are made of black material, when assembled and all openings are closed, you cannot see your hand in front of your face. You could operate your ScAir Structure day or night.

What are some of the special features built into ScAir Structures?

ScAir Structures modular design allows for the interior layout to change as often as you desire. Multiple structures can be connected to extend the size or your attraction and additional ScAir Structure Rooms can be added to any of the doorways.

ScAir Structures are not designed with a specific theme, although interior and exterior themed panels are available, so you can customize the look of your attraction. ScAir Structures may be toned down for younger children or cranked up to scare even the pros. The entire surface of the ScAir Structures can also be painted to fit your own theme.

The interior walls for the ScAir Haunt are made of the same durable vinyl and are secured by Velcro tabs at the top and at the bottom. It takes about 30 seconds to secure one wall. This not only makes the initial set-up easy but allows for changes to be made even after your event has opened. You can literally move walls nightly or even in between groups.

ScAir Structures even have “cradles” built into the perimeter walls, enabling extension cords, run speaker wires, etc.. to be routed thought the structure without being seen. Props, lighting, sound equipment and signage can be secured and displayed throughout the ScAir Structure using the “D” rings integrated into the unit or with duct tape and plastic ties.

All ScAir Structures are equipped with a minimum of four doors that can be secured in the open or closed position. They are also equipped with ventilation hatches in the roof.

Although, BLACK, is the most popular color, it’s not the only one. You can order you ScAir Structure in a variety of colors, or you can change the color by ordering the exterior color panels.

ScAir Structures can and should be anchored to the ground, using the double looped nylon strapping that is sewn into the unit around the lower and upper perimeters. When properly secured, ScAir Structures are able to withstand the elements. The low profile and large footprint allow them to stand up to strong winds. The water resistant peaked roofs allow rain and snow to roll off.

ScAir Structures are inflated by Drieaz blowers, the only manufacture with the UL approval. Once turned on they only draw about 11amps, so they will not be a big draw on your electricity source. Once your unit is inflated, the blowers can stay on for the duration of your event, thanks to the self lubricated sealed housing.

The only tools you need to assemble a ScAir Structure are a hand truck and a ladder. The only building materials you will need include; duct tape, plastic ties, etc..

When properly disassembled, ScAir Structures can be stored in the corner of a garage or a backyard shed. This means transporting your ScAir Structure can be done with just a pick-up truck.

ScAir Structures are made of a flame resistant 12oz vinyl that will stand up to years of use.

The bottom line..

ScAir Structures will not only save you money, but operated correctly, they can pay for themselves their first season!

Our “turn key” unit, the ScAir Haunt, can pay for itself in just 13 nights, with only 200 patrons per night, at a $5 ticket price. That is a low turnout at a cheap ticket price. Not to mention that after Halloween is over you can continue to operate and rent out your ScAir Structure throughout the year.

Labor cost money. Since ScAir Structures can be assembled within hours, your volunteer force can be used for performing not construction and your financing can be used for marketing, props, etc..

ScAir Structures provide a lot more flexibility over conventional haunts, when choosing a location. Since assembly and disassembly takes hours not weeks, you will only require a location for a fraction of the time, this results in dramatic savings on your lease. ScAir Structures can be set-up inside or outside, in a field or parking lot. And since no building materials are required there will be no waste, customizing you haunt to a specific location